support@kaust.edu.sa
+966 (12) 808-3463
  • العربية
logo-black
  • Home
  • People
    • Current
    • Alumni
    • Group photos 
  • Research
  • Publications
    • 2024
    • 2023
    • 2022
    • 2021
    • 2020
    • 2019
    • 2018
    • 2017
    • 2016
    • Journal covers
  • Internship
  • News
  • KPV-LAB in the press
  • Join us
  • Contact us
breadcrumb-bg

Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking

  1. Home
  2. Publications
  • Clear filters

Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking

by Eiji Kobayashi, Stefaan De Wolf, Jacques Levrat, Antoine Descoeudres, Matthieu Despeisse, Franz-Josef Haug, Christophe Ballif
Year: 2017 DOI: https://doi.org/10.1016/j.solmat.2017.06.023

Bibliography

Kobayashi, Eiji, Stefaan De Wolf, Jacques Levrat, Antoine Descoeudres, Matthieu Despeisse, Franz-Josef Haug, and Christophe Ballif. "Increasing the efficiency of silicon heterojunction solar cells and modules by light soaking." Solar Energy Materials and Solar Cells 173 (2017): 43-49.

Abstract

​Silicon heterojunction solar cells use crystalline silicon (c-Si) wafers as optical absorbers and employ bilayers of doped/intrinsic hydrogenated amorphous silicon (a-Si:H) to form passivating contacts. Recently, we demonstrated that such solar cells increase their operating voltages and thus their conversion efficiencies during light exposure. We found that this performance increase is due to improved passivation of the a-Si:H/c-Si interface and is induced by injected charge carriers(either by light soaking or forward-voltage biasing of the device). Here, we discuss this counterintuitive behavior and establish that: (i) the performance increase is observed in solar cells as well as modules; (ii) this phenomenon requires the presence of doped a-Si:H films, but is independent from whether light is incident from the a-Si:H(p) or the a-Si:H(n) side; (iii) UV and blue photons do not play a role in this effect; (iv) the performance increase can be observed under illumination intensities as low as 20 W m−1 (0.02-sun) and appears to be almost identical in strength when under 1-sun (1000 W m−1); (v) the underlying physical mechanism likely differs from annealing-induced surface passivation.​

Keywords

Solar cells Solar module silicon heterojunction (SHJ) Passivating contact Light soaking Fill factor
logo-white

"KAUST shall be a beacon for peace, hope and reconciliation, and shall serve the people of the Kingdom and the world."

King Abdullah bin Abdulaziz Al Saud, 1924 – 2015

Contact Us

    stefaan.dewolf@kaust.edu.sa
  • 4700 King Abdullah University of Science and Technology

    Al-Kindi (building 5), Level 3 Seaside, Right side

    Thuwal 23955-6900

    Kingdom of Saudi Arabia

Tweets by KAUST_KPVLab

© King Abdullah University of Science and Technology. All rights reserved

Privacy Policy
Terms of Use
Loading...